Showing posts with label Quality Management System. Show all posts
Showing posts with label Quality Management System. Show all posts

Friday, September 25, 2009

ISO 9001 Standards In General

ISO 9001 Standards In General
The adoption of a quality management system should be a strategic decision of an organization. The design and implementation of an organization’s quality management system is influenced by— its business environment, changes in that environment, or risks associated with that environment,— its varying needs,— its particular objectives,— the products it provides,— the processes it employs,— its size and organizational structure.It is not the intent of this International Standard to imply uniformity in the structure of quality management systems or uniformity of documentation.The quality management system requirements specified in this International Standard are complementary to requirements for products. Information marked “NOTE” is for guidance in understanding or clarifying theassociated requirement.This International Standard can be used by internal and external parties, including certification bodies, to assess the organization’s ability to meet customer, statutory and regulatory requirements applicable to theproduct, and the organization’s own requirements.The quality management principles stated in ISO 9000 and ISO 9004 have been taken into consideration during the development of this International Standard.

ISO 9001 – Compatibility with other management systems

ISO 9001 – Compatibility with other management systems
ISO 9001 and ISO 9004 are quality management system standards which have been designed to complement each other, but can also be used independently.ISO 9001 specifies requirements for a quality management system that can be used for internal application by organizations, for certification, or for contractual purposes. It focuses on the effectiveness of the qualitymanagement system in meeting customer requirements.ISO 9004 gives guidance on a wider range of objectives of a quality management system than does ISO 9001, particularly for the continual improvement of an organizations overall performance and efficiency, as well as its effectiveness. ISO 9004 is recommended as a guide for organizations whose top management wishes to move beyond the requirements of ISO 9001, in pursuit of continual improvement of performance. However, it is not intended for certification or for contractual purposes.
During the development of this International Standard, due consideration was given to the provisions of ISO 14001:2004 to enhance the compatibility of the two standards for the benefit of the user community.This International Standard does not include requirements specific to other management systems, such as those particular to environmental management, occupational health and safety management, financialmanagement or risk management. However, this International Standard enables an organization to align or integrate its own quality management system with related management system requirements. It is possible foran organization to adapt its existing management system(s) in order to establish a quality management system that complies with the requirements of this International Standard.

Benefits Of Obtaining ISO 9000 Certification

Benefits Of Obtaining ISO 9000 Certification
Implementing a quality management system brings internal benefits to most organizations, as well as opening up opportunities vis-à-vis the outside world.
Internal benefits to the company include:
• improved customer focus and process orientation within the company;
• improved management commitment and decision-making;
• better working conditions for employees;
• increased motivation of employees;
• reduced cost of internal failures (lower rates of rework, rejection, etc.) and external failures (fewer customer returns, replacements, etc.); and last but not least,
• continual improvement of the quality management system.
The following external benefits are generated:
• customers are more confident that they will receive products conforming to their requirements, which in turn results in higher customer satisfaction;
• an improved image of the company;

• more aggressive publicity, as customers can be informed of the benefits of their doing business with a company that manages the quality of its outputs;
• more confidence that the company’s products meet relevant regulatory
requirements;
• better objective evidence to defend product liability charges if such are brought by customers.
Refer http://www.iso9001-standard.us/ for more information.

Implementing A Quality Management System

Implementing A Quality Management System
An ISO 9000:2008 quality management system can be implemented by following the steps detailed as follows:
1. Evaluate the organization’s need/goals for implementing a QMS Need may arise from repeated customer complaints; frequent warranty returns; delayed deliveries; high inventories; frequent production hold-ups; and high level of rework or rejection of products or services.
At this stage, identify the goals which you would like to achieve through a QMS, such as customer satisfaction, increased market share, improved communications and morale in the organization, greater efficiency and profitability, etc. Another objective in implementing a QMS may be a demonstration of compliance through third party certification, which may be requested by an important client or required for enlisting as a supplier to large companies, e.g., original equipment manufacturers (OEMs).
2. Obtain information about the ISO 9000 family
The persons identified for initiating the development of an ISO 9000 QMS need tounderstand the requirements of ISO 9001:2008 as read with ISO 9000:2000 and ISO 9001:2008.
Supporting information such as quality management principles, frequently asked questions (FAQs), guidance on clause 1.2 (application) of ISO 9001:2008, guidance on documentation requirements of ISO 9001:2008 and other brochures are available free of charge on the ISO web site;
3. Appoint a consultant, if necessary
If, within the organization, you do not have adequate competence to develop a QMS, you may appoint a consultant. Before doing so, it is good to check his/her background; knowledge about the product realization processes of your organization; and experience in helping other organizations to achieve their stated goals, including certification.
Carry out a cost-benefit analysis of hiring a consultant and agree the scope of his/her work in writing. It is also possible to appoint a consultant only for the training of key staff; the latter can then carry out further training and development of the system.
4. Awareness and training
Raise awareness about QMS requirements amongst all personnel performing activities that affect quality. Plan for and provide specific training on how to develop Quality Manuals; on procedures; on QMS planning; on how to identify and implement improvement processes; and on how to audit compliance with the QMS, etc.
The Institute of Quality Assurance (IQA), the American Society for Quality (ASQ)and the International Auditor and Training Certification Association (IATCA) can provide lists of training organizations.
5. Gap analysis
Evaluate gaps between your existing quality management system and the QMS requirements of ISO 9001. Prepare how to bridge these gaps, including by planning for any additional resources required. Gap analysis may be carried out through selfassessment or by the external consultant.
6. Product realization processes
Review clause 7 of ISO 9001:2008 relating to “Product realization” to determine how the requirements apply or do not apply to your company’s QMS.
The processes covered by this clause include:
• Customer-related processes
• Design and development
• Purchasing
• Production and service provision
• Control of measuring and monitoring devices
Note that if your company is not responsible for preparing the design of your product, you can exclude the requirement for “design and development” from your QMS and explain the reasons for doing so in your Quality Manual.
7. Staffing
Decide on the responsibilities of the persons who will be involved in developing and documenting the QMS, including the appointment of a management representative who will oversee the implementation of the QMS. Establishing a project Steering Committee may also prove useful to oversee progress and provide resources wherever required.
8. Planning a time frame
Prepare a complete plan to close the gaps identified in Step 5 to develop the QMS processes. In the plan, include activities to be performed, resources required, responsibilities and an estimated completion time for each activity. Clauses 4.1 and
7.1 of ISO 9001:2008 provide information that should be used when developing the plan. The total time required for each phase (planning, documentation, implementation and evaluation) depends on the extent of the gaps in your existing QMS.
9. Draft a Quality Manual
In your Quality Manual;
• Include how the QMS applies to the products, processes, locations and departments of the organization;
• Exclude any requirement with justification for doing so as decided in step 6
above;
• Refer to or include documented procedures for QMS;
• Describe the interaction between the processes of the QMS, e.g., the interaction between product realization processes and other management, measurement and improvement processes; and
• Draft the quality policy and quality objectives for the organization.
The staff concerned in the organization should review the Quality Manual and the documented procedures so that their comments and suggestions can be taken into account before the Quality Manual and procedures are approved for issue and use.
The effective date of implementation should also be decided.
10. Carry out internal audits
During the phase of implementation of some three to six months after the documentation has been written, the trained auditors should carry out one or two internal audits covering all activities for the QMS, and concerned management should take corrective action on the audit findings without delay. Wherever required, revise the manuals, procedures and objectives. After each internal audit, the top management should review the effectiveness of the system and provide necessary resources for corrective actions and improvements.
11. Apply for certification
On satisfactory completion of Step 10, and if your company decides to obtain third party certification, you can make an application for certification to an accredited certification body. The certification audit process is explained section VII.
12. Conduct periodic evaluations
After certification, the organization should periodically conduct internal audits to review the effectiveness of the QMS and see how it can be “continually improved”. The organization should evaluate periodically if the purpose and goals (see Step 1) for which the QMS was developed are being achieved, including its continual improvement.

ISO 9001 Standards – Management Review

ISO 9001 Standards – Management Review
Review the quality management system at planned intervals to:- Assess possible opportunities for improvementEnsure a suitable, adequate, and effective system

- Evaluate the need for any changes to the system
- Consider the need for changes to the quality policy and objectives
Maintain records of the management reviews.
Inputs for management review must include information on:
- Results of audits
- Customer feedback
- Process performance and product conformity
- Status of preventive and corrective actions
- Follow-up actions from earlier reviews
- Changes that could affect the quality system
- Recommendations for improvement
Outputs from the management review must include any decisions and actions related to:
- Improvement of the effectiveness of the quality management system and its processes
- Improvement of product related to customer requirements
- Resource needs

Scope Of The Quality Management System

Scope Of The Quality Management System
The ISO 9001 standard requires the quality manual to include the scope of the quality management system including details of justification for any exclusion. The standard addresses activities that may not be relevant or applicable to an organization. The permissible exclusions are explained in section 1.2 of ISO 9001. Here it states that the organization may only exclude requirements that neither affect the organization’s ability, nor its responsibility to provide product that meets customer and applicable regulatory requirements. The requirements for which exclusion is permitted are limited to those in section 7 of the standard.
Under ISO 9001:2008, it was possible for organizations to exclude functions and processes of their organization that may have been difficult to control or were not part of the order fulfilment cycle. Organizations that designed their own products but not for specific customers could escape bringing these operations into the management system. Marketing was omitted because it operated before placement of order. Accounting, Administration, Maintenance, Publicity, Public Relations and After Sales Support functions were often omitted because there were no requirements in the standard that specifically dealt with such activities. As there is no function in an organization that does not directly or indirectly serve the satisfaction of interested parties, it is unlikely that any function or process will now be excluded from the quality management system.
It is sensible to describe the scope of the quality management system so as to ensure effective communication. The scope of the quality management system is one area that generates a lot of misunderstanding particularly when dealing with auditors, consultants and customers. When you claim you have a management system that meets ISO 9001 it could imply that you design, develop, install and service the products you supply, when in fact you may only be a distributor. Why you need to justify specific exclusions is uncertain because it is more practical to justify inclusions.
The scope of the quality management system is the scope of the organization. There is no longer any reason to exclude locations, activities, functions or processes for which there is no requirement in the standard. The reason is because the ISO 9000 family now serves customer satisfaction and is not limited to quality assurance as were the 1994 versions of ISO 9001, ISO 9002 and ISO 9003.
It is not appropriate to address exclusions by inserting pages in the manual corresponding to the sections of the standard and adding justification if not within the scope of the management system – such as ‘We don’t do this!’.
It is much more appropriate to use an appendix as indicated previously in the manual contents list. By describing the nature of the business, you are establishing boundary conditions. If in doing so you do not mention that you design products, it will be interpreted that design is not applicable.
For exclusions relative to detail requirements, the Compliance Matrix may suffice but for an unambiguous solution, it is preferable to produce an exposition that addresses each requirement of the standard.

Monday, September 21, 2009

Scope Of The Quality Management System

Scope Of The Quality Management System
The ISO 9001 standard requires the quality manual to include the scope of the quality management system including details of justification for any exclusion. The standard addresses activities that may not be relevant or applicable to an organization. The permissible exclusions are explained in section 1.2 of ISO 9001. Here it states that the organization may only exclude requirements that neither affect the organization’s ability, nor its responsibility to provide product that meets customer and applicable regulatory requirements. The requirements for which exclusion is permitted are limited to those in section 7 of the standard.
Under ISO 9001:2008, it was possible for organizations to exclude functions and processes of their organization that may have been difficult to control or were not part of the order fulfilment cycle. Organizations that designed their own products but not for specific customers could escape bringing these operations into the management system. Marketing was omitted because it operated before placement of order. Accounting, Administration, Maintenance, Publicity, Public Relations and After Sales Support functions were often omitted because there were no requirements in the standard that specifically dealt with such activities. As there is no function in an organization that does not directly or indirectly serve the satisfaction of interested parties, it is unlikely that any function or process will now be excluded from the quality management system.
It is sensible to describe the scope of the quality management system so as to ensure effective communication. The scope of the quality management system is one area that generates a lot of misunderstanding particularly when dealing with auditors, consultants and customers. When you claim you have a management system that meets ISO 9001 it could imply that you design, develop, install and service the products you supply, when in fact you may only be a distributor. Why you need to justify specific exclusions is uncertain because it is more practical to justify inclusions.
The scope of the quality management system is the scope of the organization. There is no longer any reason to exclude locations, activities, functions or processes for which there is no requirement in the standard. The reason is because the ISO 9000 family now serves customer satisfaction and is not limited to quality assurance as were the 1994 versions of ISO 9001, ISO 9002 and ISO 9003.
It is not appropriate to address exclusions by inserting pages in the manual corresponding to the sections of the standard and adding justification if not within the scope of the management system – such as ‘We don’t do this!’.
It is much more appropriate to use an appendix as indicated previously in the manual contents list. By describing the nature of the business, you are establishing boundary conditions. If in doing so you do not mention that you design products, it will be interpreted that design is not applicable.
For exclusions relative to detail requirements, the Compliance Matrix may suffice but for an unambiguous solution, it is preferable to produce an exposition that addresses each requirement of the standard.